Make sure to send us your feedback to review and wall to earn these point to use for next purchase. This feedback will enable us to improve our service to other customer in future. Thank you for purchasing at our store !
KLDSLR Retail Store
We will open every day at 10AM to 7PM daily.
Address : KLDSLR Lot 61-4A, Jalan SS2/75, 47300 Petaling Jaya
Online Orders
Regular checkout will be only process on Monday to Friday. Cut off time at 12PM for same day delivery. Special urgent case can be handle manually if you need. Please contact WhatsApp for assistance.
Shipping
All order that purchase before Cut Off time, will be send same day with Pos laju or Citylink. For KL Area, you may opt for High speed delivery to receive your item the same day evening.
Store Pickup
Store Pickup orders placed up to 12PM will be available for same-day pickup after 1PM until store closing time (Only for local Malaysia credit card / bank transfer transaction) . Foreign transaction will need 48 hours for fraud scanning. Store Pickup orders placed less than 1 hour from store closing, or while the store is closed, will be ready for pickup 30 minutes after the store reopens. For item that Pre-Order Status, or out of stock, pick up will be only available after item arrive. Our staff will contact you for the pick up when its ready.
Rm600 Terpakai - PocketWizard FlexTT5 Transceiver Radio Slave untuk Sistem Canon E-TTL II (Model CE dengan Frekuensi 433 MHz). 95% seperti baru dan berfungsi sepenuhnya
Yang mana satu frekuensi terbaik? US atau CE?
Petikan dari laman web PocketWizard:
Di Amerika Utara dan Selatan (dan beberapa bahagian Asia) kami menggunakan julat 340 –354 MHz kerana ia adalah julat frekuensi yang paling kurang sesak untuk kelas peranti pemicu tanpa wayar kami. Pilihan lain seperti 433 MHz, jalur ISM 900– 930 MHz, atau jalur 2.4 GHz mempunyai lebih banyak peranti yang mengganggu. Dalam penyelidikan kami, kami mendapati berjuta-juta peranti pada jalur ini manakala antara 340-354MHz terdapat kurang kesesakan. Frekuensi yang kurang sesak meningkatkan kebolehpercayaan dan mengurangkan kemungkinan tembakan terlepas akibat gangguan. |
Model USA = 344.0 MHz Frekuensi
Model CE = 433 MHz Frekuensi
PocketWizard FlexTT5 Transceiver Radio Slave adalah sebahagian daripada sistem radio slave yang sangat serbaguna, dan dikhaskan khusus untuk sistem kawalan kilat Canon E-TTL II. Ia hanya meluncur terus ke dalam hot shoe kamera, dan tidak ada tetapan khas yang perlu dibuat atau mod yang perlu dipanggil. Gunakan kamera, kilat di kamera, atau kawalan komander kilat untuk pampasan kilat, kawalan zon dan nisbah. Ia menyokong unit kilat tunggal atau pelbagai unit kilat yang dikhaskan.
FlexTT5 adalah tambahan yang ideal untuk mana-mana sistem kilat Canon E-TTL II. Oleh kerana sistem ini berfungsi pada teknologi radio digital, ia boleh menyokong operasi E-TTL sehingga 800', bahkan di sekeliling sudut, di luar pandangan, atau dalam cahaya matahari yang terang.
FlexTT5 adalah "Transceiver", yang bermaksud ia boleh digunakan sama ada sebagai pemancar yang diletakkan ke dalam hot shoe kamera, dalam kombinasi dengan unit FlexTT5 lain di hujung kilat, atau sebagai penerima, dengan unit pemancar MiniTT1 yang hanya diletakkan pada hot shoe kamera.
Nota: Kabel pemicu Pocket Wizard ini TIDAK serasi: #802-502, 802-511, 804-512. Lihat Tab Aksesori untuk kabel pemicu yang serasi.
Ciri-ciri
2 Tetapan Saluran + Mod Belajar
Setiap tetapan boleh diprogram untuk menyokong sehingga 20 saluran ControlTL untuk fotografi TTL, atau 32 saluran standard untuk fotografi kilat manual. Transceiver FlexTT5 juga mempunyai suis pemilih tiga zon, yang berintegrasi dengan zon dan nisbah Canon. Mod Belajar membolehkan unit mengesan saluran yang digunakan oleh mana-mana unit lain di kawasan tersebut.
Serasi Terbalik
Beroperasi pada saluran yang sama seperti semua PocketWizards lain dan akan berfungsi dengan mana-mana unit yang mungkin sudah anda miliki.
HyperSync & Teknologi Sync Kelajuan Tinggi
Menyokong kelajuan sync kilat sehingga 1/500 saat. Sync Kelajuan Tinggi secara automatik menyelaraskan sistem kilat dengan tetapan kelajuan pengatup kamera, sehingga 1/8000 saat.
Hot Shoe Terbina Dalam
Mempunyai hot shoe di bahagian atas, supaya anda masih boleh memasang unit kilat terus ke kamera. Ini membolehkan anda menggabungkan kilat jauh anda dengan kilat di kamera, atau menggunakan kilat di kamera untuk kawalan E-TTL II tambahan sahaja.
Port Kamera/Kilat
Transceiver FlexTT5 mempunyai dua port plug-in untuk digunakan dengan kamera Canon E-TTL II jauh, atau unit kilat bukan TTL lain. Pemicu jauh kamera juga memerlukan penggunaan "kabel motor" khusus kamera.
Pemicu Kamera Jauh/Mod Relay
Boleh digunakan untuk memicu kamera dari jauh. Memerlukan penggunaan "kabel motor" khusus kamera. Mod Relay Auto membolehkan anda memicu kamera jauh selaras dengan kilat jauh.
Reka Bentuk Profil Rendah
FlexTT5 terletak rata untuk tidak mengganggu dan menggunakan antena yang boleh dilipat untuk jarak tambahan apabila diperlukan.
Boleh Dikonfigurasi dan Ditingkatkan
FlexTT5 mempunyai port mini-USB, yang menjadikannya boleh ditingkatkan dan "masa depan-bukti" untuk penambahbaikan berterusan dan peningkatan keserasian. Perisian PocketWizard Utility yang disertakan membolehkan anda memilih tetapan khusus melalui sambungan USB, dan menetapkannya untuk menggunakan saluran tertentu yang digunakan oleh unit Pocket Wizard lain.
Maklumat Penting
Unit yang dijual di USA menggunakan 344.0 MHz untuk saluran 1-16, dan 346.5-354.0 MHz untuk saluran 17-32
Unit yang dijual di Eropah menggunakan 433.62 MHz untuk saluran 1-16, dan 434.22 untuk saluran 17-32
Model USA dan Euro tidak boleh berkomunikasi antara satu sama lain
Model USA mungkin mengganggu peranti di Eropah
Spesifikasi
- Serasi TTL
- E-TTL, E-TTL II
- # Saluran
- 52 Saluran di 26 Frekuensi
- Antena
- 2.8" (7.1cm) getah dengan ayunan 180°
- Jarak Maksimum
- 800' (240 m) untuk pemicu E-TTL
1200' (365 m) untuk pemicu standard
- Pemasangan
- Hot-shoe, soket 1/4"-20, tali leher
- Port
- 1/8" (3.5mm) stereo miniphone (untuk pemicu kamera)
1/8" (3.5mm) mono miniphone (operasi kilat)
- Keperluan Kuasa
- 2x bateri AA
- Hayat Bateri
- 60 jam (kilat)
200 jam (masa "terjaga" kamera)
- Dimensi
- 3.6 x 2.8 x 1.4" (9.2 x 7.1 x 3.6cm) P x L x T
- Berat
- 5.4 oz (153g) [tanpa bateri]
Rm600 Used - PocketWizard FlexTT5 Transceiver Radio Slave for Canon E-TTL II System (CE Model with 433 MHz Frequency) . 95% like new fully working
Which is the best frequency? US or CE?
Quote from PocketWizard website:
In North and South America (and some parts of Asia) we use the 340 –354 MHz range because it is the least crowded frequency range for ourclass of wireless triggering devices. Other choices like 433 MHz, 900– 930 MHz ISM band, or the 2.4 GHz band have many more interferingdevices on them. In our research, we found millions of devices on these bands whereas between 340-354MHz there was much less crowding. A less crowdedfrequency improves reliability and reduces the possibility of missedshots due to interference. |
USA Model = 344.0 MHz Frequency
CE Model = 433 MHz Frequency
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units.
The FlexTT5 is the ideal addition to any Canon E-TTL II flash system. Since this system works on digital radio technology, it can support E-TTL operation up to an amazing 800', even around corners, out-of-sight, or in bright sunlight.
The FlexTT5 is a "Transceiver", meaning it can be used either as a transmitter placed into the camera's hot shoe, in combination with another FlexTT5 unit on the flash end, or as a receiver, with a MiniTT1 transmitter-only unit placed on the camera's hot shoe.
Note:These Pocket Wizard trigger cords are NOT compatible: #802-502, 802-511, 804-512. See Accessories Tab for compatible trigger cords.
Features
2 Channel Settings + Learn Mode
Each setting can be programmed to support up to 20 ControlTL channels for TTL photography, or 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, which integrates with Canon zones and ratios. The Learn Mode allows the unit to detect the channel used by any other unit in the area.
Reverse Compatible
Operates on the same channels as all other PocketWizards and will work with any unit you may already have.
HyperSync & High-Speed Sync Technology
Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs flash system with the camera's shutter speed setting, up to 1/8000th.
Built-in Hot Shoe
Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only.
Camera/Flash Ports
The FlexTT5 Transceiver has two plug-in ports for use with remote Canon E-TTL II cameras, or other non-TTL flash units. Camera remote triggering also requires use of a camera-specific "motor cord".
Remote Camera Triggering/Relay Mode
Can be used to trigger a camera remotely. Requires use of a camera-specific "motor cord". Auto Relay Mode allows you to trigger a remote camera in sync with a remote flash.
Low-Profile Design
The FlexTT5 lies flat to stay out of the way and uses a flip-up antenna for additional range when needed.
Configurable and Upgradeable
The FlexTT5 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades. The included PocketWizard Utility software allows you to select custom settings through the USB connection, and to set it to use specific channels used by other Pocked Wizard units.
Important Information
Units sold in USA use 344.0 MHz for channels 1-16, and 346.5-354.0 MHz for channels 17-32
Units sold in Europe use 433.62 MHz for channels 1-16, and 434.22 for channels 17-32
USA and Euro models cannot converse with each other
USA models may interfere with devices in Europe
Specifications
- TTL Compatible
- E-TTL, E-TTL II
- # Of Channels
- 52 Channels over 26 Frequencies
- Antenna
- 2.8" (7.1cm) rubberized with 180° swing
- Maximum Range
- 800' (240 m) for E-TTL triggering
1200' (365 m) for standard triggering
- Mounting
- Hot-shoe, 1/4"-20 socket, lanyard
- Ports
- 1/8" (3.5mm) stereo miniphone (f/camera triggering)
1/8" (3.5mm) mono miniphone (flash operation)
- Power Requirements
- 2x AA batteries
- Battery Life
- 60 hours (flash)
200 hours (camera "awake time")
- Dimensions
- 3.6 x 2.8 x 1.4" (9.2 x 7.1 x 3.6cm) LxWxH
- Weight
- 5.4 oz (153g) [w/o batteries]